Mamod
Black Funnel
Mamod Black Funnel.Small end that fits in to boiler.As shipped with all new Mamod Steam Engines. ..
£7.45
Boiler Blank 1/4 inch BSF
Standard Mamod 1/4 Inch BSF Boiler Blanks This can be used to blank off a spare boiler thread o..
£4.99
Boiler Inserts 1/4 inch BSF
Standard Mamod 1/4 Inch BSF Boiler Inserts Solder the insert in to the boiler.Suitable for the ..
£4.75
Boiler Inserts 3/16 inch BSF
Standard Mamod 3/16 Inch BSF Boiler Inserts Solder the insert in to the boiler.Suitable for the..
£4.75
Boiler Inserts 3/8 inch
Threaded boiler insert for the 3/8inch safety valve Used on Mamod SE2, SE3 and SE1 static engin..
£4.99
Brass Canopy Screw
Brass canopy screw as fitted on the latest models. For the use on the traction engine and steam..
£3.25
Brass Pulley to Fit Dynamo
Pulley to fit the Mamod dynamo.2mm Shaft, Outer Dimensions will vary. ..
£5.99
Bulb for the MES Bulb Holder
Bulb for the MES Bulb Holder.For use with the dynamo..2.5v 0.75w. ..
£2.35
Burner Tray for TE1a, SR1a
Solid Fuel Burner Tray X141.Fits Mamod Te1a, SR1a, SP2, SW1 and many others.Includes plastic handle ..
£12.99
Burner Tray with Shield for SP2, SP4
Solid Fuel Burner Tray X141S.Fits Mamod SP2, SP4 Steam EnginesIncludes plastic handle and shield. ..
£17.99
Burner Tray with Shield for SP5
Solid Fuel Burner Tray X141SP5.Fits Mamod SP5 Steam EnginesIncludes plastic handle and shield. ..
£22.99
Crankshaft for Mamod SP2
Crankshaft to fit the Mamod SP2. 46mm long (excluding crank web) 3/16" shaft. Overall leng..
£9.99
Crankshaft for Mamod SP4
Crankshaft to fit the Mamod SP4. 64mm long (excluding crank web) 3/16" shaft. Overall leng..
£9.99
Crankshaft for SR1, TE1a, and SW1
Crankshaft to fit the Mamod Traction Engine or Steam Roller TE1a or SR1a. 82mm long (excluding ..
£9.99
Driving Bands (2) for SA1 Roadster, Fire Engine & Limo
Driving Bands for SA1 Roadster, Fire Engine & Limo.There are two bands in this pack.This is for ..
£5.95
Driving Bands (2) SR1a, TE1a
Driving bands for the Mamod Traction Engine TE1a and Steam Roller SR1a (Also TE1 and SR1) .There are..
£5.95
Driving Bands (2) SW1 Steam Wagon
Driving bands for the Mamod SW1 Steam Wagon.There are two bands in this pack.Consists of one large b..
£5.95
Driving Bands (2) Unjoined
Mamod's unjoined driving bands for general use .There are two bands in this pack.Can be use to link ..
£5.95
Driving Bands (4) for WS1 Workshop
Driving Bands for WS1 Workshop (4).There are four bands in this pack.Set of 4 drive bands to fit the..
£7.45
Dynamo (1v - 4v) With Brass Pulley
Dynamo 1v to 4v Output.Supplied with brass pulley. Wires soldered on ready to use. (A..
£19.99
Dynamo (1v - 4v) With Plastic Pulley
Dynamo 1v to 4v Output.Supplied with plastic pulley. Wires soldered on ready to use. ..
£16.75
Front Fork Spring TE1a and SR1a
Front fork spring for the TE1a and SR1a. Coil spring for the front forks on the Mamod tractio..
£3.25
Genuine Mamod Tyres For TE1a
Mamod Tyres - Set of Four for the Mamod Steam Engine TE1aIncludes 2 Rear Tyres with Tread (One with ..
£13.80
Lubrication Oil 30ml
Lubrication Oil 30ml.Essential for the smooth running of the steam engines.Recommended for the pisto..
£7.99
Mamod Copper Pipes for Te1a SR1a SW1
Copper pipe set for Te1a, SR1a and SW1 3 pipes in total, cut and shaped to the correct length.&..
£9.99
Mamod Large Hub Caps (x2)
Mamod Large Hub Caps.This pack contains 2 genuine Mamod large hub capsFits the rear wheels of the TE..
£4.99
Mamod Reverse Lever TE1A SR1A
Mamod Reverse Lever TE1A SR1A.Fits the Traction Engine, Steam Roller, Steam wagon. ..
£9.45
Mamod Small Hub Caps (x2)
Mamod Small Hub Caps.This pack contains 2 genuine Mamod small hub capsFits the front wheels of the T..
£4.99
Mamod Steam Roller Front Forks SR1
Front fork assembly for the Mamod Steam Roller SR1.Includes the washer, nut and spring. ..
£22.95
Mamod Steam Roller Front Rollers
Mamod Steam Roller Front Rollers SR1Pack contain 2 rollers.Small Hub Caps are required to secure the..
£35.95
Mamod Steam Roller Rear Wheels
Mamod Steam Roller Rear Wheels SR1aPack contains 2 wheels.Large Hub Caps are required to secure the ..
£35.95
Mamod TE1a Canopy Assembly
Canopy for the Mamod TE1a traction engineRed banner on side saying Mamod Steam Tractor.Knurled nut a..
£39.25
Mamod TE1a Front Fork Assembly
Front fork assembly for the TE1a Includes spring, nut and washer. (Does not include leaf spring..
£32.99
Mamod TE1a Front Leaf Spring
Mamod TE1a Front Leaf Spring.Leaf spring to fit on the front axle of the Mamod TE1/TE1a Traction Eng..
£3.99
Mamod Traction Engine Back Wheel TE1a
Rear Wheels for the TE1a Traction EngineThis pack contains 2 wheel.Large hub caps are required to se..
£38.99
Mamod Traction Engine Front Wheel
Mamod Traction Engine Front WheelFront Wheels for the TE1a Traction Engine, Showmans Engine and Mamo..
£32.99
Mamods Bag of Washers (Updated 28th April 2020)
Mamod supplied bag of washers pack.Spring, trunnion bolt and small metal washer for the cylinder ass..
£11.85
Mamods Essential Washers
Essential Washers1 x Fibre Washer for the Water Level Plug (3/16" Internal Dia)1 x Fibre Washer for ..
£3.45
SA1 Wheel for Roadster (1 Wheel)
SA1 Wheel for Roadster Complete with tyre There is no fixing screw of this wheel ONE ..
£19.99
Safety Valve (Standard) 1/4" BSF
Standard Long Safety Valve X005 Standard Safety valve for most Modern Mamod Steam Engines. ..
£13.95
Safety Valve 1/4" BSF Short - Older Models
Mamod short safety valve (1/4 inch BSF) Short (approximately 1") ¼" BSF Safety Valve for early..
£13.95
Safety Valve 3/8" Diameter (SE1, SE2, SE3)
Large diameter safety valve to fit Mamod SE1, SE2 & SE3 3/8 inch thread. Releasing pressure..
£13.95
Scuttle SR1a, TE1a, SW1
Scuttle that fits the Traction Engine, Steam Roller or Steam Wagon SW1Holds the burner tray in place..
£19.99
Sight Glass Assembly
Standard Sight Glass Assembly.To fit the larger style boilers.This style has the screw fitting and t..
£12.50
SP4 / SP5 Piston Cylinder Assembly
SP4 / SP5 Piston Cylinder Assembly.Piston and Cylinder Assembly for the SP4 and SP5 static steam eng..
£19.99
Standard Flywheel for the TE1a, SR1
Standard Flywheel for the TE1a, SR1.Fits many models in the Mamod range including SR1a TE1a, SW1, MM..
£16.99
Standard Piston Cylinder Assembly
Standard Piston Cylinder Assembly X301/X401.Includes washer, spring and bolt.Fits TE1a, SR1a, SW1, C..
£19.99
Standard Whistle Assembly
Standard Whistle Assembly X034.Fits most Mamod Steam Engines.Uses the 1/4" BSF Thread. ..
£16.99
Steering Rod TE1a, SW1, SW1a for Models Made 2019 Onwards
Steering Rod TE1a, SW1, SW1a, SR1a for all models made from the middle 2019 onwards - 4mm adaptorSte..
£17.99
Steering Rod TE1a, SW1, SW1a Older Models Before 2019
Steering Rod TE1a, SW1, SW1a, SR1a for all older models prior to middle 2019 - 2BA AdapterSteering r..
£17.99
Water Level Plug With Bent Levers
Mamod water level plug. Used on many older models including the Tractor Engine, Steam Rollers a..
£10.99
Water Level Plug With Straight Bar
Mamod water level plug. Used on many older models including the Tractor Engine, Steam Rollers a..
£10.49
1312 SR1A Steam Roller
A superbly realistic model of an early road roller.Dimensions: 285 x 150 x 185mmWeight 1940gmsAlso a..
£198.00
1312C SR1AC Steam Roller Challenger
The Challenger incorporates the successful design of the piston valve with double action for mo..
£320.50
1313 TE1A Traction Engine in Green
Attractive working model of a traditional English traction engine.Dimensions: 285 x 150 x 185mmWeigh..
£209.95
1313 TE1AB Traction Engine in Brass
Attractive working model of a traditional English traction engine.Dimensions: 285 x 150 x 185mm.Weig..
£209.95
1313C TE1ac Traction Engine Centurion
The Centurion incorporates the successful design of the piston valve with double action for more pow..
£320.50
1318 SW1 Blue Steam Wagon (with barrels)
A robust model of a Blue Steam Wagon with BarrelsDimensions: 450 x 180 x 210mmWeight 3070gmsAlso ava..
£319.00
1319 SA1 Cream Steam Roadster
A magnificent working model of a steam car which captures the elegance of a bygone age.Dimensions: 1..
£299.00
1319B SA1B Burgundy Steam Roadster
A magnificent working model of a steam car which captures the elegance of a bygone age.Dimensions: 1..
£299.00
1319BT SA1BT Brookland Tourer
A magnificent working model of a steam car which captures the elegance of a bygone age.Dimensions: 1..
£299.00
1332 SP2 Steam Engine
Powerful, compact engine capable of driving workshop models.Dimensions: 185 × 206 × 126 mmWeight 116..
£136.00
1334 SP4 Steam Engine
Versatile unit capable of driving larger models.Dimensions: 185 × 260 × 208 mmWeight 1650gmsIdeal mo..
£172.50
1335 SP5 Steam Engine
Powerful, compact engine capable of driving workshop models.Dimensions: 185 × 206 × 126 mmWeight 116..
£209.00
1335D SP5D Steam Engine & Dynamo
SP5D Steam Engine with Dynamo and bulb, pressure gauge extra also available. (Forward running only)...
£298.50
1336 WS1 Workshop
1336 WS1 Workshop AccessoryIncludes Power Press, Polishing Mop, Grinder, HammerPair of un-joined dri..
£187.00
1336A WS1 Polishing Mop
1136C Accessory Polishing Mop.Dimensions: 82 × 80 × 55 mmWeight 120gmss..
£91.00
1336A WS1 Power Press
1136C Accessory Power Press.Dimensions: 105 × 80 × 55 mmWeight 118gms..
£91.00
1338 SP6 Steam Engine
SP6 Double Action Piston Cylinder. The most powerful Mamod stationary engine to date.Dimensions: 185..
£316.00
1350 SF Solid Fuel (1 Packet)
Solid Fuel Tablet.20 Tablets per packet.Use 2 to 3 tablets per run.Dimensions: 30 × 95 × 57 mmWeight..
£6.25
1350 SF Solid Fuel (4 Packets)
Solid Fuel Tablet.20 Tablets per packet (80 tablets in total).Use 2 to 3 tablets per run.Dimensions:..
£23.95